BigcommerceCDN

Cleaning and Finishing Agents

Cleaning and finishing agents for edgebanders from Riepe and TC-Edge

  • Image of Riepe NFLY Release Agent 30 Litre (91627-30K)

    Riepe NFLY Release Agent 30 Litre

    (a) Intermittent application to the pressure roller • Glue residues cannot adhere to the roller (b) Spray directly onto the surface of the edgeband• Avoidance of marking and damage• Protective film is protected and not removed from the...
    $532.00
    Add to Cart
  • Riepe LP 163/93 Cleaning Agent 30 Liter Riepe LP 163/93 Cleaning Agent 30 Liter

    Riepe LP 163/93 Cleaning Agent 30 Liter

    Features: • Range of application: Before buffing wheels, cleaning brushes and manual board cleaning• Application of the cleaning agent in front of the buffing discs, the release agent applied before will be removed together with...
    $460.69
    Add to Cart
  • Image of the TC-EDGE Separating Agent XE2 18.9L

    TC-EDGE Separating Agent XE2 18.9L

    NEW! MADE IN USA edgebanding chemical!  Spray this fast-acting agent on the tops and bottoms of laminated panels to reduce glue adhesion to panel surfaces. Wipe on later by cloth to remove excess glue and spatter from panels and machine...
    $257.00
    Add to Cart
  • Image of the

    TC EDGE XE 4 - Finishing Agent 18.9L

    NEW! MADE IN USA edgebanding chemical! Great final cleaner for non-porous surfaces. It helps to remove previous films or streaks from other chemical agents. It aids in cooling the glued tape and joint while giving the final trimmed and buffed...
    $257.00
    Add to Cart
  • TC-EDGE Finishing Agent XE4 8L (TCEDGE XE4 8L) TC-EDGE Finishing Agent XE4 8L (TCEDGE XE4 8L)

    TC-EDGE Finishing Agent XE4 8L

    TC-EDGE Finishing Agent XE4   Application Site: Prior to Buffing Station   Application: Liquid Cleaning/Purifying Agent for edgebanders. Removes glue residue, protective film, and smears. 8 Liter Container. Comparable to LP163/93 **...
    $111.60
    Add to Cart
  • TC-EDGE Separating Agent  XE2 8L

    TC-EDGE Separating Agent XE2 8L

    TC-EDGE Separating Agent XE2    Application Site: Prior to Pre-Mill   Application: Liquid Separating/Release Agent for edgebanders. Prevents adhesion of glue to the panel surfaces. ** This product is available for pick up in...
    $111.60
    Add to Cart
  • Image of

    Acmos 100-2450 Release Agent

    Universally functional as a release agent against all glues used in woodworking, including hotmelt.  Can be used on pressure rollers or even in a glue pot, will eliminate glue sticking.
    $31.50
    Add to Cart